Path: utzoo!mnetor!uunet!husc6!bbn!gatech!ufcsv!beach.cis.ufl.edu!jdc
From: jdc@beach.cis.ufl.edu (Jeff Capehart)
Newsgroups: comp.sys.apple
Subject: Re: Transwarp
Message-ID: <10333@ufcsv.cis.ufl.EDU>
Date: 23 Jan 88 03:15:37 GMT
Sender: news@ufcsv.cis.ufl.EDU
Reply-To: jdc@beach.cis.ufl.edu (Jeff Capehart)
Organization: UF CIS Department
Lines: 16
Keywords: Accelerator

I have a Transwarp card installed in a //e along with a mouse card, the
Sider controller, floppy disk, RC Systems Slotbuster II, the 80 col card,
and sometimes a serial card (SSC).  My problem is that some programs in
Hi-res graphics mode get little blips on the display screen.  The entire
8 bit pattern on the screen is cleared even tho the byte read from that
particluar location will say it should be $FF.  An attempt to clear it
to 0, and then store $FF again will lite it up.  This only happens when
the transwarp runs at fast speed and the Slotbuster is installed.  For
those who dont know, the Slotbuster performs multi functions of Parallel
port, serial port, clock (opt), and speech synthesis.  Does this also
sound like a power supply problem?  I do have a fan, but just the old
power supply that came with it.  It is enhanced //e (1984).  Thanks.

--
Jeff Capehart 		Internet: micronaut%oak.decnet@pine.circa.ufl.edu
University of Florida	UUCP:	  ..!ihnp4!codas!ufcsv!beach.cis.ufl.edu!jdc