Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!imagen!atari!neil
From: neil@atari.UUCP (Neil Harris)
Newsgroups: comp.sys.atari.st
Subject: Re: blitters for 520's
Message-ID: <953@atari.UUCP>
Date: 19 Jan 88 18:13:58 GMT
References: <519UD138985@NDSUVM1>
Organization: Atari Corp/Mktg
Lines: 20

In article <519UD138985@NDSUVM1>, UD138985@NDSUVM1.BITNET writes:
>      
>      Are we talking a board swap or a unplug and plug operation on our
> current boards?  I have an Aerco ram upgrade and would hate to have to
> take it out and put it on a new board just to get the blitter chip, assuming
> it fits in there with a blitter inside also.
>      
>      Also, what is the cost of this up grade going to be and if it is just
>      a new set of chips, can we do the installation ourselves?

We're talking "here's the chips, now get them installed".  With all the
various boards out there, it seems that there was no better solution.

Pricing is not yet finalized, but should be around $120.

-- 
--->Neil Harris, Director of Marketing Communications, Atari Corporation
UUCP: ...{hoptoad, lll-lcc, pyramid, imagen, sun}!atari!neil
GEnie: NHARRIS/ WELL: neil / BIX: neilharris / Delphi: NEILHARRIS
CIS: 70007,1135 / Atari BBS 408-745-5308 / Usually the OFFICIAL Atari opinion