Xref: utzoo comp.sys.att:2150 comp.unix.questions:5098
Path: utzoo!utgpu!water!watmath!clyde!rutgers!bellcore!faline!ulysses!sfmag!sfsup!mingus
From: mingus@sfsup.UUCP (Damballah Wedo)
Newsgroups: comp.sys.att,comp.unix.questions
Subject: Re: Problem with a.out's
Message-ID: <2642@sfsup.UUCP>
Date: 19 Jan 88 18:03:55 GMT
References: <1181@cooper.cooper.EDU>
Reply-To: mingus@sfsup.UUCP (Damballah Wedo)
Organization: The Poto Mitan in the Houmfor
Lines: 15

> c.ng@cooper.cooper.EDU (Cho Ng ) (in <1181@cooper.cooper.EDU>):
> So here is my problem: When I try to execute a.out, I get the message
> 'a.out: Cannot execute'.  

You say support chips, your disk and your operating system were replaced
on your machine. In that case, the problem may be that the machine is
running the CPLU 4.2 compiler in MAU-only mode but you don't have a MAU.
The MAU is the Math Accelerator chip. CPLU 4.2 MAU-only mode requires that
you have a MAU even if your program does no floating point. If you don't
have and are not planning to get a MAU, you might wish to re-install the
CPLU in compatibility mode. That will let you run your a.outs.
-- 
Marcel-Franck Simon				attunix!mingus

	Min pouki sa tout moun ap mande'-m' ki sa siyati-moin vle' di?