Xref: utzoo comp.sys.mac:10785 comp.sys.ibm.pc:10426
Path: utzoo!utgpu!water!watmath!clyde!rutgers!labrea!decwrl!sun!pitstop!sundc!seismo!uunet!mcvax!unido!iraun1!iravcl!joachim
From: joachim@iravcl.ira.uka.de
Newsgroups: comp.sys.mac,comp.sys.ibm.pc
Subject: AppleTalk PC card
Message-ID: <30@iravcl.ira.uka.de>
Date: 13 Jan 88 13:18:41 GMT
Lines: 14
Posted: Wed Jan 13 14:18:41 1988
Organisation: Universitaet Karlsruhe, IRA, F.R. Germany

I purchased an AppleTalk PC Card on monday. Its obvious that you should
not have a mouse and a modem (I am using an AT - PC users might use IRQ 2)
otherwise you'll have to trash one...

I would like to use IRQ 5 for the AppleTalk PC card (not used in my system,
I've only one printer attached). - should be an easy hardware modification.
However, the atalk.exe program does not allow /cardint=5. Has anyone
done that before?  Is someone at Apple listening?

I know that this modification will void warranty and that any hints 
regarding the patch will be without any garantees..

Joachim Lindenberg, University of Karlsruhe
Federal Republic of Germany, West Germany.