Xref: utzoo comp.dcom.modems:1328 comp.sys.mac:11813 Path: utzoo!mnetor!uunet!lll-winken!lll-lcc!ames!pasteur!agate!violet.berkeley.edu!edmoy From: edmoy@violet.berkeley.edu (;;;;YF37) Newsgroups: comp.dcom.modems,comp.sys.mac Subject: Re: Practical Peripherals 2400 modem advice Message-ID: <6774@agate.BERKELEY.EDU> Date: 29 Jan 88 19:28:14 GMT References: <893@ur-tut.UUCP> Sender: usenet@agate.BERKELEY.EDU Reply-To: edmoy@violet.berkeley.edu.UUCP () Distribution: na Organization: University of California, Berkeley Lines: 29 Keywords: practical peripherals modem 2400 baud GEnie In article <893@ur-tut.UUCP> syap@ur-tut.UUCP (James Fitzwilliam) writes: >I have seen the Practical Peripherals 2400 baud model advertised for under >$200.00, which is right for my budget. Does anyone have experience with >this unit? I would especially like to hear from anyone who's tried it >with GEnie, since that service seems especially fussy when it comes to >X-modem. Is it well made? Does it function well at all three speeds? > >I would also like to know what S-registers it has, what options you can set, >how Hayes-compatible it really is; that's one thing I like about the Popcom: >you can set just about everything, hangup delay, tone delay, online. I have had the Practical Peripherals 2400 baud modem for several months now, and it seem to work just fine. I've had no problems it at 1200 buad to either CompuServe, GEnie or Unix systems. At 2400 baud, the Unix system works fine again, but I'm have some problem with CompuServe (I think it is the freeware terminal emulator Term-Plus that is the problem, not the modem). I haven't had a chance to try GEnie at 2400 baud. As for S-registers, it has probably most if not all of the ones in a real Hayes 2400 baud modem. I don't have the manual with me, but I've not had to mess much with it, as the default configuration worked fine with all the above systems. Edward Moy Workstation Software Support Group University of California Berkeley, CA 94720 edmoy@violet.Berkeley.EDU ucbvax!violet!edmoy