Path: utzoo!mnetor!uunet!wa3wbu!john
From: john@wa3wbu.UUCP (John Gayman)
Newsgroups: comp.dcom.modems
Subject: Telebit firmware ??
Message-ID: <477@wa3wbu.UUCP>
Date: 6 Feb 88 06:11:15 GMT
Organization: WA3WBU, Marysville,PA
Lines: 21


    I just received my Telebit Trailblazer and have been pulling my
hair out trying to get it to work. Im running Microport Sys V/AT.
I have a freind with virtually the same setup and he has the modem
working fine. So I know if *can* work. The obvious thing is that
his TB+ has firmware 3.01 and mine came with 4.0. Does anyone know
what was done with 4.0 that may be causing my problem in trying to
copy my freinds register settings ?  I can get it to dial and connect
but after the connect it just sits there and eventually hangs up. I've
reverted back to my Hayes SM2400 until I get it figured out. Im running
Honneydanber UUCP, but for some reason the Microport version doesnt
appear to support the "Dialers" file. Anyone with suggestions on any
of this ? Thanks.

					John


-- 
John Gayman, WA3WBU              |           UUCP: uunet!wa3wbu!john
1869 Valley Rd.                  |           ARPA: wa3wbu!john@uunet.UU.NET 
Marysville, PA 17053             |           Packet: WA3WBU @ AK3P