Path: utzoo!utgpu!water!watmath!clyde!bellcore!decvax!ucbvax!agate!ig!uwmcsd1!bbn!rochester!cornell!uw-beaver!fluke!jeff
From: jeff@tc.fluke.COM (Jeff Stearns)
Newsgroups: comp.dcom.modems
Subject: Re: Telebit Rev 4.0 reverse channel (was: Trailblazer working on tty000?)
Message-ID: <2872@fluke.COM>
Date: 13 Feb 88 01:39:43 GMT
References: <995@neoucom.UUCP> <718@ddsw1.UUCP>
Sender: news@tc.fluke.COM
Organization: John Fluke Mfg. Co., Inc., Everett, WA
Lines: 19

In article <718@ddsw1.UUCP> karl@ddsw1.UUCP (Karl Denninger) writes:
> ...
>Unfortunately, we don't have anyone to talk to at 19.2k yet (on both ends);
>I'd like to see what kind of throughput is achievable in this case...

I'd be happy to participate in such an experiment.  Our two Trailblazers are
both locked to 19200 baud, and the Systech serial interface behind them is
fast enough to send and absorb a full window's worth of data at that rate
without dropping any.  (A Sun model 100U runs it all (a gasp of horror is
heard from the back of the room!) and can barely keep up at 19.2 if nothing
else is going on.)

If anybody's interested, phone or drop a note.
-- 
	    Jeff Stearns
    Domain: jeff@tc.fluke.COM
     Voice: +1 206 356 5064
      UUCP: {uw-beaver,decvax!microsof,ucbvax!lbl-csam,allegra,sun}!fluke!jeff
     Snail: John Fluke Mfg. Co. / P.O. Box C9090 / Everett WA  98206