Path: utzoo!mnetor!uunet!husc6!rutgers!ucsd!ucbvax!ECLA.USC.EDU!BHUBER
From: BHUBER@ECLA.USC.EDU
Newsgroups: comp.sys.apple
Subject: Re: PC Transporter / Apple Drive 3.5
Message-ID: <[ECLA.USC.EDU]31-Jan-88.09:34:04.BHUBER>
Date: 31 Jan 88 17:34:00 GMT
References: <8801180856.AA02695@crash.cts.com>
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 14

I recently inquired of the network members whether anyone was able to daisy
shain an Apple 3.5 drive behind a 5.25" PC Transporter configuration.  With
help from Applied Engineering, the problem has been resolved.  It turns out
that I had a bad cable assembly in the drive.  AE indicated that they are
aware of several bad cable assemblies in their early 5.25" drive systems for
the Transporter.  If you hear of similar problems, AE can help you resolve it.

New subject:  PC Transporter will work with Kermit out to a modem through
my GS serial port.  However, it is unable to keep up at speeds greater than
1200 bps.  Has anyone successfully run Kermit on Transporter, with Kermit
emulating a VT102 at 2400 bps without overrun occuring?

Cheers,
Bud