Path: utzoo!mnetor!uunet!pyrdc!gmu90x!dolqci!vrdxhq!grebyn!umd5!brl-adm!husc6!ukma!psuvm.bitnet!p4o
From: P4O@PSUVMA.BITNET
Newsgroups: comp.sys.atari.8bit
Subject: Re: Modem communications on an 800
Message-ID: <32196P4O@PSUVMA>
Date: 5 Feb 88 13:46:22 GMT
References: <6548@sol.ARPA>
Organization: The Pennsylvania State University - Computation Center
Lines: 12

Ok,first off I've seen a term program(PD) that will emuninate the VT100
and 4 others systems as well.  I will post the address A/S/A/P.
(Saw add in Antic)
     
 To connect the Modem on an 800 you might need a Serial converter
to connect the two. You can make a homemake ringer from a relay
and connect it to a joystick port. (I have plans if you need them)
     
Good luck,
Patrick J. O'Toole
Worthless Worthington Penn State Campus