Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!amdcad!ames!rutgers!mtune!codas!killer!jolnet!tarkus!jcs
From: jcs@tarkus.UUCP (John C. Sucilla)
Newsgroups: comp.sys.att
Subject: Re: accept/reject dont't work
Message-ID: <42@tarkus.UUCP>
Date: 4 Feb 88 05:40:36 GMT
References: <327@dalcsug.UUCP> <240@icus.UUCP>
Reply-To: jcs@tarkus.UUCP (John C. Sucilla)
Distribution: na
Organization: tarkus -- Calumet City, IL.
Lines: 19
Summary: What about enable and disable?

In article <240@icus.UUCP> lenny@icus.UUCP (Lenny Tropiano) writes:
>In article <327@dalcsug.UUCP> ptmcd@dalcsug.UUCP (P. Trent MacDougall) writes:
>|>I have version 3.51 of UNIX on my 3B1.  I have just gotten a printer
>|>and have found out that accept/reject do not work.  They accept anything
>$ /usr/lib/accept Epson Parallel
>destination "Epson" now accepting requests

I've always used "enable" and "disable" both here on the 3B1 and at work
on our 3B20S to do what your talking about. Any user can do it.
 
 
 
 

-- 
John "C" Sucilla
{ihnp4}!tarkus!jcs

Don't let reality stop you....