Path: utzoo!utgpu!water!watmath!clyde!rutgers!bellcore!faline!ulysses!gamma!mibte!jbh
From: jbh@mibte.UUCP (James Harvey)
Newsgroups: comp.sys.cbm
Subject: help with 1802 monitor
Keywords: 1802, GoldStar, Bellyup
Message-ID: <2486@mibte.UUCP>
Date: 31 Jan 88 19:43:21 GMT
Organization: Michigan Bell Telephone Company
Lines: 34


>HELP!<

I have an older 1802 monitor that went belly up.  It's statistics are:
Serial number XJ1079351
Manufactured March, 1985
Made by Gold Star. Chassis # CC-2


From the symptoms, I believe the high voltage regulator is gone (screen
went real bright and out of focus suddenly)

This is the monitor that was styled to go with the Plus Four, it has two
large knobs on the lower right front and the on/off is a large button
on the left side.

I have heard from people that service CBM equipment that Commodore disowns
this monitor and that Goldstar won't admit to having manufactured it either.
The local Commodore shop (Microworld in Livonia) has no information.  Could 
someone on the net or at Commodore direct me to some info and a schematic of 
this unit?  I know of two other owners in the same fix as I.


Thanks in advance...

-- 

Jim Harvey                        |      "Ask not for whom the bell
Michigan Bell Telephone           |      tolls and you will only pay
29777 Telegraph                   |      Station-to-Station rates."
Southfield, Mich. 48034           | 

   ihnp4!mibte!jbh   or try   ulysses!gamma!mibte!jbh