Path: utzoo!mnetor!uunet!lll-winken!lll-lcc!ames!ll-xn!mit-eddie!uw-beaver!cornell!rochester!ritcv!awp8101
From: awp8101@ritcv.UUCP (Andrew W. Potter)
Newsgroups: comp.sys.dec
Subject: Re: VS2000 serial line problem
Message-ID: <172@ritcv.UUCP>
Date: 4 Feb 88 19:52:29 GMT
References: <176@smegma.UUCP>
Reply-To: awp8101@ritcv.UUCP (Andrew W. Potter)
Organization: Rochester Institute of Technology, Rochester, NY
Lines: 18

In article <176@smegma.UUCP> jkh@smegma.UUCP (Hose Head) writes:
>... Run a 2400 baud modem and LOSE BIG! I can't
>even imagine what would happen if I used a telebit trailblazer.
>
I have a 2400 modem connected to the modem port on my VS2000 and seem
to run with no problem...I have the port fixed at 9600 Baud and let
the modem speed match.  (I get a small amount of data compression
with MMP).  Things run peachy.   I even experimented with
ASYNC decnet over the port at full 9600 baud.  It seemed to be
no worse than a DZ port on a 780.

Another way you can connect to your VS2000 is via LAT.  That also works
like a champ and is quite efficient.


Andrew W. Potter                         Email: awpsys@ritvax.BITNET
Systems Programmer                              awp8101@ritcv.UUCP
Information Systems and Computing
Rochester Institute of Technology, Rochester NY, 14623 (716) 475-6994