Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!texsun!texsun.central-relay.sun.com!convex!convexe!authorplaceholder
From: loafman@convexe.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Re: PICNIX 2.0
Message-ID: <63200026@convexe>
Date: 2 Feb 88 16:24:00 GMT
References: <4344@uwmcsd1.UUCP>
Lines: 20
Nf-ID: #R:uwmcsd1.UUCP:-434400:convexe:63200026:000:1055
Nf-From: convexe.UUCP!loafman    Feb  2 10:24:00 1988


I have been following this discussion for a while and I disagree.  If
we are to keep the net flowing then those in charge need to know that
there are problems, and perhaps free some time for someone to chase
down where the problems are.

For example, we got all of the PICNIX F1 parts _EXCEPT_ part 4.  I am
going to have to ask for a repost of that part just to get a complete
set.  It just never appeared here at all.  The other parts appear to
be OK, but until I can assemble them, I won't know about that.  If we
did not get it, then the people downline from us could not -- correct?

So if you would, please (re)post part 4 of PICNIX F1.  Thanks.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Kenneth W. Loafman @ CONVEX Computer Corp, Dallas, Texas | All opinions
Voice:	  work: (214) 952-0829  home: (214) 964-1250     | are my own,
USPSnail: 1705 Coit Rd #2101, Plano, Tx 75075		 | of course.
UUCP:	  ihnp4!convex!loafman				 |        ...KWL
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~