Path: utzoo!utgpu!water!watmath!clyde!rutgers!umd5!uvaarpa!virginia!uunet!wa3wbu!john
From: john@wa3wbu.UUCP (John Gayman)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Need info - Using large capacity hard disk w/MS-DOS
Summary: speedstor
Keywords: MS-DOS Hard Disk
Message-ID: <487@wa3wbu.UUCP>
Date: 10 Feb 88 03:13:32 GMT
References: <5561@sgistl.SGI.COM>
Organization: WA3WBU, Marysville,PA
Lines: 18

In article <5561@sgistl.SGI.COM>, larry@sgistl.SGI.COM (Larry Autry) writes:
> I am using DOS 3.2 and I want to format and partition an 80 meg drive.
> What I need to know is how to format the drive, then how to set the partitions

   I would recommend Speedstor from Storage Dimensions. It can partition
any disk up to 1GB into as many little partitions as you want. It also
allows for a SINGLE 80 MB partition in your case. If of course you can
live with 1024 byte sectors. I use this software on my 71 MB Miniscribe and
have it divided into two 32MB (C & D) and a 6MB (E). It works flawless.

					John



-- 
John Gayman, WA3WBU              |           UUCP: uunet!wa3wbu!john
1869 Valley Rd.                  |           ARPA: wa3wbu!john@uunet.UU.NET 
Marysville, PA 17053             |           Packet: WA3WBU @ AK3P