Path: utzoo!utgpu!water!watmath!clyde!rutgers!rochester!udel!burdvax!bpa!drexel!jeff
From: jeff@drexel.UUCP (Jeff White)
Newsgroups: comp.sys.ibm.pc
Subject: Need help printing > 132 characters per line in Multiplan
Keywords: Multiplan printing > 132 DOS
Message-ID: <558@drexel.UUCP>
Date: 12 Feb 88 18:39:18 GMT
Organization: Drexel University, Phila., Pa.
Lines: 13


   One of the persons I work with needs to print Multiplan documents which
have line longs longer than 132 characters.  He is running Multiplan 2.0 under
DOS 2.? on a Tandy 1200 (XT clone).  Originally, it hung at 80 characters/line,
so I set up the DOS command, "mode lpt1:132/dmp" to be executed in the
autoexec.bat (dmp specifies dot matrix printer).  That shifted it up to 132
chars, but I can't go any higher (lpt1:200 fails).  Multiplan is configured
in Print Options for the desired length (ie. 160).  Any help would be 
appreciated.

						Jeff White
						Drexel University - ECE Dept.
						rutgers!bpa!drexel!jeff