Path: utzoo!utgpu!water!watmath!clyde!rutgers!mit-eddie!uw-beaver!cornell!batcomputer!itsgw!steinmetz!uunet!wa3wbu!john
From: john@wa3wbu.UUCP (John Gayman)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Procomm 2.4.2 Question
Summary: dont change state of DTR
Message-ID: <490@wa3wbu.UUCP>
Date: 13 Feb 88 00:05:53 GMT
References: <4114@ptsfa.UUCP>
Organization: WA3WBU, Marysville,PA
Lines: 15

In article <4114@ptsfa.UUCP>, res@ptsfa.UUCP (stockwell-1140galaxy-Bob Stockwell) writes:
> Is there a way to terminate Procomm w/o hanging up?

    I beleive if you option your modem to ignore the state of DTR, you
should be able to exit without breaking the connection. The only thing
Procomm will do upon exit is sometimes send a BREAK signal to the
serial port.

					John


-- 
John Gayman, WA3WBU              |           UUCP: uunet!wa3wbu!john
1869 Valley Rd.                  |           ARPA: wa3wbu!john@uunet.UU.NET 
Marysville, PA 17053             |           Packet: WA3WBU @ AK3P