Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!amdcad!ames!pasteur!ucbvax!hplabs!hpda!hpcupt1!stephens
From: stephens@hpcupt1.HP.COM (Greg Stephens)
Newsgroups: comp.sys.mac
Subject: Re: File xfer Timings
Message-ID: <6150011@hpcupt1.HP.COM>
Date: 22 Jan 88 17:52:42 GMT
References: <6150007@hpcupt1.HP.COM>
Organization: Hewlett Packard, Cupertino
Lines: 12

Oops, the baud rate was 57kb.  

Both Mac2624 and Reflection will add linefeed on xfer to the HP 3000.
Only reflection has a command language (a big difficiency in Mac2624).
Reflection also has typeahead.  Mac2624 has a slight edge in terms
of reliability in working with HP 3000 block mode programs but
Reflection is catching up quickly (especially with their 2.0 release).
Reflection also wins for display speed (although you only see the
difference when direct connected at 9600 or higher baud rates).
While reflection is getting much better, Mac2624 is still a much more
Mac-like application.  Reflection is more like the HP terminals,
especially in the area of configuration screens.