Path: utzoo!mnetor!uunet!steinmetz!beowulf!bownesrm
From: bownesrm@beowulf.UUCP ( Stowaway aboard the Long Shot)
Newsgroups: comp.sys.tandy
Subject: Re: Help wanted with ancient TRS80 Model I
Message-ID: <942@beowulf.UUCP>
Date: 27 Jan 88 19:38:46 GMT
References: <4480@ecsvax.UUCP> <3247@psuvax1.psu.edu>
Distribution: na
Organization: Function Consulting, Albany New York
Lines: 21
Keywords: TRS80 Model I Single Density Disk Drive Help Needed
Summary: Be Carefull

In article <3247@psuvax1.psu.edu>, wcf@psuhcx (Bill Fenner) writes:
> Since the drive motor goes on with the connector the one way, that's the
> way you want it.  However, you are probably using the wrong connector.
> The motor for all 4 drives goes on when one drive is turned on.  So try
> each of the other connectors.  Also, have you got your terminating resistor
> in the drive?
> 

	Be carefull. If you get the connector on the wrong way (Upside down)
ALL of the drive lights and motors will come on....If I remember correctly,
it is the rearmost connector, though it may be the back one on the side...
It's been soooooo long.


Bob Bownes, aka iii, aka captain comrade bob    | Since I AM my employer,
Function Consulting,	Albany, New York, 12203 | I guess these opinions are
(518)-482-8798 voice (518)-482-9228 (anon uucp) | those of my employer 
 bownesrm@beowulf.uucp				| my houseplants, and my TR-6.

	OS/3D: The nightmare continues!!! Coming through a screen near you,
			REAL SOON NOW!!!!!	(ick, letnI!!!!)