Path: utzoo!utgpu!water!watmath!clyde!cbosgd!ihnp4!ihuxv!tedk
From: tedk@ihuxv.ATT.COM (Kekatos)
Newsgroups: sci.electronics
Subject: Re: X10 specs/parameters
Keywords: x10 BSR Leviton remote automation
Message-ID: <2458@ihuxv.ATT.COM>
Date: 16 Feb 88 17:57:20 GMT
References: <960@ur-tut.UUCP>
Reply-To: tedk@ihuxv.UUCP (55624-Kekatos,T.G.)
Distribution: na
Organization: AT&T Bell Laboratories - Naperville, Illinois
Lines: 14

In article <960@ur-tut.UUCP> syap@ur-tut.UUCP (James Fitzwilliam) writes:
>
>Are parameters for the X10 system publicly available, if so, where?  i.e.
>what must be broadcast on the AC line for "Unit E-15 / Dim / All off"  I'm
>interested in a telephone controller that would respond to touch-tones,
>but since I have the Powerhouse I would rather not get the Homeminder, so:
>					James

This subject is lively on the 'misc.consumers.house' newsgroup. There have
been several magazine articles about building controllers.

Subscribe there and look for "home automation" and "X-10". 

You could then try posting same request on misc.consumer.house