Path: utzoo!mnetor!uunet!husc6!bbn!gatech!linus!gwr
From: gwr@linus.UUCP (Gordon W. Ross)
Newsgroups: comp.dcom.modems
Subject: Need info on Anderson Jacobson AJ1234
Message-ID: <25012@linus.UUCP>
Date: 22 Feb 88 18:56:17 GMT
References: <483@wa3wbu.UUCP>
Reply-To: gwr@linus.UUCP (Gordon W. Ross)
Organization: The MITRE Corporation, Bedford, MA.
Lines: 23
Keywords: Anderson Jacobson
Summary: What makes it transmit a carrier?

I am looking for information about my Anderson Jacobson (model AJ1234)
modem.  It has both an acoustic coupler and a direct connection
ability,  but it does not seem to respond to a Bell 212 answer
carrier.  I am hoping someone can find a user's manual for this
anchor, or perhaps just tell me what this thing is.

I'm not sure what signal states it wants on the RS232 port or what
connections can be made to its "DAA/DIRECT" connector (has six large
pins in a row).  I tried playing with the control lines on its RS232
port using a breakout box but could not get the thing to communicate.
I would like to know if this thing is not working or if I'm just not
using it correctly.

It has switches inside to select baud rate (1200 or 600 bps), parity,
bits per symbol, carrier frequency (1200, 1205, or 1225 Hz),
synchronous or asynchronous mode, and transmit/receive power levels
for direct connection.

Any information, suggestions, or especially a user's manual would be
very helpful.  Thank-you...
-- 
Gordon W. Ross	MITRE (E025), Burlington Road, Bedford, MA 01730
gwr%linus@mitre-bedford.arpa	{decvax,philabs}!linus!gwr.UUCP