Path: utzoo!mnetor!uunet!husc6!cmcl2!nrl-cmf!ukma!gatech!mcnc!decvax!ucbvax!RADC-MULTICS.ARPA!Network_Server.Daemon
From: Network_Server.Daemon@RADC-MULTICS.ARPA
Newsgroups: comp.os.vms
Subject: Unable to deliver mail from INFO-VAX@KL.SRI.COM@oly.acs.washington.edu@KL.SRI.COM
Message-ID: <8802231452.AA20064@ucbvax.Berkeley.EDU>
Date: 18 Feb 88 02:58:00 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 51

Recipient >udd>5581iPROJ>Dziegiel>Dziegiel.mbx at RADC-MULTICS.ARPA failed because Allocation could not be performed..

******************** Failed message follows. ********************

Received: from KL.SRI.COM by RADC-MULTICS.ARPA TCP; 17-Feb-1988 21:58:28-est
Received: from oly.acs.washington.edu by KL.SRI.COM with TCP; Thu 11 Feb 88 16:38:53-PST
Received: from OLY.ACS.WASHINGTON.EDU(MAILER) by oly.acs.washington.edu(SMTP) ; Thu, 11 Feb 88 16:39:23 PST
Received: from VAX1 by OLY.ACS.WASHINGTON.EDU (Mailer X1.25) with BSMTP id
 2836; Thu, 11 Feb 88 16:39:20 PST
Received: from JNET-DAEMON by VAX1; Thu, 11 Feb 88 16:40 PST
Date: Thu, 11 Feb 88 16:40 PST
From: The Mail Server <Postmaster@UWAV1.ACS.WASHINGTON.EDU>
Subject: Undeliverable mail
To: INFO-VAX@KL.SRI.COM

Message had a bad or missing To address.
The entire text of the message follows:

Received: by OREGON1 (Mailer X1.25) id 0383; Thu, 11 Feb 88 16:29:57 PST
Date: Sat, 23 Jan 88 11:01:02 EST
From: Ted Corning <Kismet%UMASS.BITNET@CUNYVM.CUNY.EDU>
Subject: VMS 4.6 / DMF-32 problems??
Sender: INFO-VAX Discussion <INFO-VAX@MARIST>
To: 'Robert Allen DeLoura' <DELOURA@UWAV1>
Reply-to: INFO-VAX@KL.SRI.COM
Comments: To: info-vax@kl.sri.com

(Sorry if you're seeing this twice. I don't think it got out the first time)

Hi all,

   We recently tried to upgrade one of our 11/780's to VMS 4.6 from 4.5, but
we ran into a problem:

   We have two DMF-32's, which we use for terminal ports and the Sync ports.
At System startup, the Sync ports are supposed to be configure, two on each
DMF-32. For some reason, however, only the first of the four ports gets
configured. We have tried everything, even changing the device names, but
it just can't find the other ports. Has anyone else run into this problem?

   The driver we're trying to use is CONINTERR (for HASP). We also have
several Emulex boards, which are used for terminal ports.

   Any information would be appreciated.

                              Thanks,
                                 Ted Corning
                                 UMass/Boston
                                 Computing Services

-------