Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!decwrl!labrea!agate!pasteur!ames!nrl-cmf!ukma!psuvm.bitnet!cunyvm!unknown
From: rrk@byuvax.bitnet
Newsgroups: comp.os.vms
Subject: RE: Micro vax 2
Message-ID: <86rrk@byuvax.bitnet>
Date: 25 Feb 88 18:35:56 GMT
Lines: 10

To change the unit number of the RA81, you have to pull out the button that
has the drive number and replace it with a button with a lower drive number

This sounds ridiculous, but it is true.  The plastic pins on the back of the
button tell the drive what number be.  Each pin is a binary digit.  You
can cut off pins to make a low number into a high number, but it would probably
be futile to try to glue pins back on.  Ask around to see if anyone has
a spare button.  DEC probably has them all over the place.

                                Ray Whitmer