Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!decwrl!decvax!ucbvax!ucsd!sdcsvax!ucsdhub!jack!crash!pro-charlotte.cts.com!steelie
From: steelie@pro-charlotte.cts.com (Jim Howard)
Newsgroups: comp.sys.amiga
Subject: Perfect Sound for the 1000
Message-ID: <2596@crash.cts.com>
Date: 27 Feb 88 10:04:19 GMT
Sender: news@crash.cts.com
Lines: 28

I just got my Perfect Sound digitizer(from SunRize) and Im having a
bit of difficulty to say the least. 
 
I have my both channels of my stereo hooked up to the RCA inputs
on the digitizer, have everything plugged in correctly, e.t.c.  
 
I can record and monitor ONLY in stereo, it wont let me just monitor
one channel. When I select monitor or record for only one channel,
I get *NOTHING* at all. Just blank nothing. All the gain knobs are
turned up full blast, and still nothing at all. Im using v 2.2 of the
Perfect Sound software.   There are no shorts in my RCA cables, they
are exactly fine. I even re-did all the wiring onto a completly different
stereo and the same thing happened once again.  
 
Is there anything that can be done? I called SunRize and they were
at a loss to what the problem was. "Send it back" they said.  Sounds
nice enough of them, and thats probably what I'll do, but Id rather
just keep this one, and not have to wait for a replacement. 
 
Techies out there?       

"Great intelligence is usually characterized by a natural lack of 
comprehension of life."  -Henri Bergson


   UUCP:  ....!crash!pro-charlotte!steelie    | Pro-Charlotte - (704) 567-0029
   ARPA:  crash!pro-charlotte!steelie@nosc.mil| 300/1200/2400 baud  24 hrs/day
   INET:  steelie@pro-charlotte.cts.com       | Log in as "register"