Path: utzoo!mnetor!uunet!cbmvax!schein From: schein@cbmvax.UUCP (Dan Schein CATS) Newsgroups: comp.sys.amiga Subject: Re: Major AWRITE Problems! Message-ID: <3398@cbmvax.UUCP> Date: 1 Mar 88 14:19:31 GMT References: <5598@cit-vax.Caltech.Edu> Reply-To: schein@cbmvax.UUCP (Dan Schein CATS) Distribution: na Organization: Commodore Technology, West Chester, PA Lines: 29 In article <5598@cit-vax.Caltech.Edu> dknight@tybalt.caltech.edu (David B. Knight) writes: >I am having some very MAJOR problems with the AWRITE command supplied with the >Bridgeboard. I can't seem to copy files from the IBM side to the Amiga side >unless they are only about 100 bytes long. I tried transferring a small (660 >byte) file and it just created a file on the Amiga side that was "empty". I >am very desperate, as I am running a Bulletin Board on the IBM side and I >needo to do lots of transfers back and forth. AREAD works perfectly, and I >have used it successfully to transfer files larger than 300 K bytes! Now it >seems that all of the files that my users upload I can't even look at on my >Amiga. I don't want to have to buy a serial card for the IBM and transfer >the files using Kermit! Please help me! > Hmm.... very strange. I have used Awrite (and Aread) many a time for files with no problems. Check the size (byte count) of your Awrite program, mine is "10560". If thats not the problem, well lets see what happens first :-) > Dave Knight -- Dan Schein uucp: {ihnp4|allegra|burdvax|rutgers}!cbmvax!schein Commodore AMIGA ARPANET: cbmvax!schein@uunet.uu.net 1200 Wilson Drive Bix: dschein Plink: Dan*CATS West Chester PA 19380 phone: (215) 431-9100 ext. 9542 +----------------------------------------------------------------------------+ All spelling mistakes are a result of my efforts to avoid education :-) +----------------------------------------------------------------------------+ I help Commodore by supporting the AMIGA. Commodore supports me by allowing me to form my own suggestions and comments.