Path: utzoo!mnetor!uunet!cbmvax!schein
From: schein@cbmvax.UUCP (Dan Schein CATS)
Newsgroups: comp.sys.amiga
Subject: Re: Amiga 2088 Bridgeboard
Message-ID: <3403@cbmvax.UUCP>
Date: 2 Mar 88 13:45:18 GMT
References: <17148@watmath.waterloo.edu>
Reply-To: schein@cbmvax.UUCP (Dan Schein CATS)
Organization: Commodore Technology, West Chester, PA
Lines: 43

In article <17148@watmath.waterloo.edu> 221.162.fido!Dan_Herold@watmath.waterloo.edu writes:
>Hello there, I'm rather new to this board but not to the Amiga.
>I am having touble mounting my 5/1.4" floppy drive to my Amiga 2000.
>In the manual it says that I must tell AmigaDOS that I have the 5/1.4
>inch drive there.  But so far I've had no luck.  If anyone knows the
>command(s), then please leave me a message here. Thanks a lot.
>
  On page 31 of the Enhancer manual you will find a description of the MOUNT
  command and a example of the required mountlist entry.

  Format:	MOUNT <drive>:

  Mountlist example:

  df2:		Device=trackdisk.device
		Unit=2
		Flags=1
		Surface=2
		BlocksPerTrack=11
		Reserved=2
		PreAlloc=11
		Interleave=0
		LowCyl=0; HighCyl=39
		Buffers=5
		BufMemType=3

   #


   Since you have a 2000, you also have the MOUNT command. So just edit your
   mountlistand mount away. (Of course this mountlist example is for the
   CBM 1020 drive and may need to be modified for other drives :-)

-- 
   Dan Schein		 uucp: {ihnp4|allegra|burdvax|rutgers}!cbmvax!schein
   Commodore AMIGA			ARPANET:  cbmvax!schein@uunet.uu.net
   1200 Wilson Drive			Bix: dschein	     Plink: Dan*CATS
   West Chester PA 19380		phone: (215) 431-9100	   ext. 9542
+----------------------------------------------------------------------------+
   All spelling mistakes are a result of my efforts to avoid education  :-)
+----------------------------------------------------------------------------+
        I help Commodore by supporting the AMIGA. Commodore supports
         me by allowing me to form my own suggestions and comments.