Xref: utzoo comp.sys.ibm.pc:12607 comp.sys.atari.st:7922
Path: utzoo!mnetor!uunet!tektronix!sequent!mntgfx!dclemans
From: dclemans@mntgfx.mentor.com (Dave Clemans)
Newsgroups: comp.sys.ibm.pc,comp.sys.atari.st
Subject: Re: IBM PC -> Atari ST
Message-ID: <1988Feb29.091829.11946@mntgfx.mentor.com>
Date: 29 Feb 88 17:18:23 GMT
References: <919@xn.LL.MIT.EDU>
Organization: Mentor Graphics Corporation, Beaverton Oregon
Lines: 21

in article <919@xn.LL.MIT.EDU>, singer@XN.LL.MIT.EDU (Matthew R. Singer) says:
> 
> 
> Has anyone attempted to use the Atari ST color monitor on a PC
> using either a CGA or EGA card?  Was it successful? Can it be done?
> If so, where can I get the cables?
> 
> 
> Matt Singer
> Commnet Systems

The ST color monitor is an ANALOG RGB monitor; it WILL NOT work
work with a CGA or EGA card.  It's timing matches NTSC specs; voltage
levels are 1 volt peak-to-peak.  It should work with a PGA adaptor
(though you might need some voltage level conversion resistors) and
might work with a VGA card.  It also should work any Amiga.

The best place I know of for cables is Practical Solutions in Arizona.
(I think that's the name; they make the "Monitor Master").

dgc