Path: utzoo!utgpu!water!watmath!clyde!bellcore!decvax!yale!cmcl2!beta!jfd
From: jfd@beta.UUCP (John Davis)
Newsgroups: comp.sys.dec.micro
Subject: Re: Pro350 computer/hardware for sale ( not useful )
Summary: How difficult would it be to convert a Pro-350 to a PDP-11 box?
Message-ID: <15661@beta.UUCP>
Date: 17 Feb 88 17:44:53 GMT
References: <281@cutsys.UUCP> <2314@leadsv.UUCP>
Distribution: na
Organization: Los Alamos Natl Lab, Los Alamos, N.M.
Lines: 11


	 I have a Pro-350 with an RT-11 license as well as P/OS.  I would 
	 like to plug my VT102 with its own printer into the Pro-350 printer
	 port and get rid of the PI handler.  I have the Pro Technical Manual
	 and I know how to jumper the printer cable so that the printer port
	 functions as a console port.  I have SYSGENed systems on this machine
	 successfully.

	 What I don't know how to do is gen a system that will boot up without
	 PI and run off either the printer/console port or the modem port.
	 I have read the 5.1 SYSGEN manual several times.  Any advice?