Path: utzoo!mnetor!uunet!wa3wbu!john
From: john@wa3wbu.UUCP (John Gayman)
Newsgroups: comp.sys.ibm.pc
Subject: Re: ProComm Plus Kermit Problem (was Re: ProComm Plus DEL/BS)
Message-ID: <520@wa3wbu.UUCP>
Date: 2 Mar 88 03:36:01 GMT
References: <2944@swan.ulowell.edu> <2945@swan.ulowell.edu> <2212@isis.UUCP> <5108@swan.ulowell.edu>
Distribution: na
Organization: WA3WBU, Marysville,PA
Lines: 20
Summary: watch the parity

In article <5108@swan.ulowell.edu>, boneill@hawk.ulowell.edu (SoftXc Coordinator) writes:
> In article <996@nscpdc.NSC.COM> rickr@nscpdc.NSC.COM (Rick Riverman) writes:
> >
> >
> >My preliminary tests of ProcommPlus show that it won't transfer files to
> >a UNIX system using Kermit.  Procomm 2.42 does this just fine.  If you attempt
     I found that when using Procomm-plus or older versions of Procomm
to transfer files from my Unix system that I must manually set the
parity of the Unix kermit to Even. After doing this, it works just fine.
If I call a DOS BBS with my Unix machine and use Kermit, I dont have to
touch parity and it works fine.

					John



-- 
John Gayman, WA3WBU              |           UUCP: uunet!wa3wbu!john
1869 Valley Rd.                  |           ARPA: wa3wbu!john@uunet.UU.NET 
Marysville, PA 17053             |           Packet: WA3WBU @ AK3P