Path: utzoo!mnetor!uunet!husc6!hao!oddjob!gargoyle!ihnp4!ihwpt!knudsen From: knudsen@ihwpt.ATT.COM (mike knudsen) Newsgroups: comp.sys.m6809 Subject: Sardis No-Halt bugs Hard Disk? Message-ID: <2322@ihwpt.ATT.COM> Date: 15 Feb 88 19:03:10 GMT Organization: AT&T Bell Laboratories - Naperville, Illinois Lines: 22 Keywords: bugs floppy hard disk HELP I have heard rumors that the software for Sardis' no-halt floppy controller doesn't get along well with hard disks. Possibly due due its patching the kernel to put the NMI code all above FFE00. Anyway I had lots of problems this weekend trying to make a bootfile with my Burke & Burke /H0 descriptor and driver. It boots OK but you dare not iniz or open any windows, or the system crashes. Note I'm still talking floppy boot. Funny thing, if I boot an old bootfile without the hard stuff and then just LOAD and INIZ the hard stuff, everything works fine, but at an 8K penalty in system RAM space. Another symptom: if under Sardis you do a Cobbler, about 120 bytes of garbage gets added to the end of the resulting bootfile. Is that due to the patching that SDISK3 (their floppy driver) does on the Kernel? -- Mike J Knudsen ...ihnp4!ihwpt!knudsen Bell Labs(AT&T) Delphi: RAGTIMER CIS: "Just say NO to MS-DOS!" "OS/2 == 1/2 of an OS"