Path: utzoo!mnetor!uunet!husc6!tut.cis.ohio-state.edu!ukma!psuvm.bitnet!r38
From: R38@PSUVM.BITNET (aka Marc Rifkin)
Newsgroups: comp.sys.amiga
Subject: Drive Alignment problems
Message-ID: <35960R38@PSUVM>
Date: 12 Mar 88 21:42:25 GMT
Organization: The Pennsylvania State University - Computation Center
Lines: 15

Recently I have been having some problems reading disks created and
written to by DF1: on DF0:.  I am not sure if DF1: is out of
alignment and is writing bad, or if DF0: is out and reading bad.
I'll have to do more testing to find out.  I would like to
re-tune both drives, but how?  I have had experience with drives
(but not 3.5''), so do I have to get the whole computer/drive
serviced or can I do it (I have the necessary tools).
Thanks,
-------
    ____  _   __  __   __                             \Marc Rifkin    \
   /   / /|  /_  /   / \    of \      /                \R38@PSUVM.EDU  \
  /---  /-| /__ /_/ /  _\       \\  //                  \132 Beaver Hall\
 /    \                          \\// E R T E C H  , Inc.\Univ. Park, Pa.\
        "No Matter Where You go,  \/  --=======--         \16802          \
         There You Are." -BB & MM                          \814-862-6892   \