Path: utzoo!mnetor!uunet!husc6!hao!ames!ucsd!nosc!halibut!jtjones
From: jtjones@halibut.NOSC.MIL (Jeffrey T. Jones)
Newsgroups: comp.sys.apple
Subject: Re: ASCII Express Pro
Message-ID: <203@halibut.NOSC.MIL>
Date: 9 Mar 88 15:51:56 GMT
References: <331@jc3b21.UUCP> <17672@think.UUCP>
Reply-To: jtjones@halibut.nosc.mil.UUCP (Jeffrey T. Jones)
Organization: Naval Ocean Systems Center, San Diego
Lines: 22


I forgot how to include the previous article in a follow-up, but whoever asked
the question should recognize this answer.

This is from memory, so it might not be exact, but its pretty close.  To use
AE Pro as a terminal emulator, get to the correct screen (by typeing ^U), go
to the emulation screen where you'll see I)ncoming and O)utgoing. Set Incoming
to the terminal you want to emulate.  For VT-52 I think its 5.  Set Outgoing
for something like Datamedia 80-col.  I believe its number 6.

There you go.  Of course you must have the toggle for emulation ON, but other
than that, you should be emulating!! You can also modify the terminal
description a bit.  I did, to add inverse to my vt52 emulation.  I guess its
not in there by default.  I also had fairly good luck with the h19 emulation.
Hope this helps.
									Jeff

-- 
Any opinions expressed are my own, and have NO connection with my employer.
--
Jeffrey T. Jones          jtjones@nosc.ARPA
(619) 225-7815            {ihnp4,decvax,dcdwest,ucbvax}!sdcsvax!noscvax!jtjones