Path: utzoo!mnetor!uunet!nuchat!uhnix1!uhnix2!uace0
From: uace0@uhnix2.UUCP (Michael B. Vederman)
Newsgroups: comp.sys.atari.st
Subject: Re: Mouse Addresses...
Message-ID: <511@uhnix2.UUCP>
Date: 12 Mar 88 17:56:03 GMT
References: <4484@garfield.UUCP>
Reply-To: uace0@uhnix2.UUCP (Michael B. Vederman)
Distribution: na
Organization: University of Houston
Lines: 36

In article <4484@garfield.UUCP> avp@garfield.UUCP (Anthony Paul) writes:
>Back in October, the addresses went by for the mouse,
>0x26E0 - x pos
>0x26E2 - y pos
>0x26E6 - buttons.
>
>My problem, the article said these don't work on the mega.
>Anyone know what they are on the Mega?
>
>Thanks
>
>Anthony Paul


The locations for the new ROM mouse x, y, and button are as follows:

x - (HEX) 2740
y - (HEX) 2742  (both are words)
button - (HEX) 2746






Hope this helps.

-Mike

Refer to an article recently posted which gives the line-a negative offsets
for more stable memory locations of these parameters.
-- 
for (;;)                              : Use ATARINET, send an interactive
        do_it(c_programmers);         : message such as:
                                      : Tell UH-INFO at UHUPVM1 ATARINET HELP
University Atari Computer Enthusiasts : University of Houston UACE