Path: utzoo!mnetor!uunet!husc6!bloom-beacon!gatech!hubcap!ncrcae!ncr-sd!crash!gryphon!pnet02!steve1
From: steve1@pnet02.cts.com (Steve Lewellen)
Newsgroups: comp.sys.cbm
Subject: Re: C64 hardware resete
Message-ID: <2851@gryphon.CTS.COM>
Date: 12 Mar 88 10:00:45 GMT
Sender: root@gryphon.CTS.COM
Organization: People-Net [pnet02], Redondo Beach, CA.
Lines: 8

I don't have the exact numbers handy at this time, for the pins, but if
looking at the back of the computer on the cartridge port the 2 most right
contacts are all you need to work with, just take a SPST switch, install on a
breadboard, and have the 2 contacts short when you want a reset.
This is the way most users, do it.

UUCP: {ihnp4!scgvaxd!cadovax, <backbone>}!gryphon!pnet02!steve1
INET: steve1@pnet02.cts.com