Path: utzoo!mnetor!uunet!husc6!mailrus!nrl-cmf!ames!pacbell!att-ih!ncsc5!rba
From: rba@ncsc5.AT&T.NCSC (R.B. Averill x8862)
Newsgroups: comp.sys.ibm.pc
Subject: Multisync monitor w/ ATT-6300 pc
Message-ID: <267@ncsc5.AT&T.NCSC>
Date: 14 Mar 88 16:31:09 GMT
Organization: AT&T NCSC, Englewood,CO
Lines: 16
Keywords: monitor VGA

I would like to use a multisync type monitor with AT&T's PC-6300.
While my ultimate goal is to use a VGA card with this monitor, I
would prefer to use my existing CGA graphics card for now and
upgrade the card later. Assuming I have the cable pinout to build & 
connect AT&T's DB25 connector with the monitor's DB9 connector,
will it work?  Specifically, I am concerned about flicker caused
from connecting AT&T's double scanning 25KHz graphics card with a
monitor that doesn't double scan.  Are there any other gotchas??
Obviously, I can always use a 3rd party EGA card after I upgrade
the ROM BIOS to 1.43.

Any input??

Please respond to me via attmail!rgetz or 303-850-8977.
Thanks,
Randy Getz