Path: utzoo!mnetor!uunet!tektronix!tekgen!tekigm2!timothym From: timothym@tekigm2.TEK.COM (Timothy D Margeson) Newsgroups: comp.sys.ibm.pc Subject: Re: Sony Multiscan? Message-ID: <2657@tekigm2.TEK.COM> Date: 14 Mar 88 17:14:36 GMT References: <36300014@iuvax> <149000019@inmet> Reply-To: timothym@tekigm2.UUCP (Timothy D Margeson) Organization: Tektronix, Inc., Beaverton, OR. Lines: 39 In article <149000019@inmet> mbate@inmet.UUCP writes: > Though they don't like to say anything bad, the Sony didn't fare too > well. It has a mechanical relay that makes a lot of noise when you > change video modes. > > I currently have a NEC MultiSync II on order. Hi, My two or four cents worth... I have a Sony 1302, with the mechanical relay. I don't know about anyone ele, but I don't find the click annoying. Mainly due to the fact I stay in EGA mode 90% of the time (or whatever the default mode is with a Vega Deluxe card). I do run many different packages, from OrCAD to Framework, all of course twidle the display lots. The only time the display really clicks is when the scan frequency changes, or going from monochrome to color modes. The up side to all this is that the Sony is the ONLY monitor that looks good at 800x600 resolution (I should qualify that as the only fair priced monitor under $1,000.00). The NEC can barely be read because of it's poor resolution. I know, I have one at work! The Sony looks great at 800x600. Another Sony monitor to look at if price is a concern (the Sony is about $100 more than the NEC), is the Sony 1303?, it is the same electronics as the 1302 with a lower resolution display. It is the equivalent of the NEC II. I like my Sony. The colors are correct, and the contrast control really works. Not like my NEC (or any of the NEC's I've seen). If Sony and NEC don't charm you, take a look at the Mitsubishi Diamond Scan. -- Tim Margeson (206)253-5240 PO Box 3500 d/s C1-937 @@ 'Who said that?' Vancouver, WA. 98668 {amd..hplabs}cae780!tektronix!tekigm2!timothym (this changes daily)