Path: utzoo!mnetor!uunet!husc6!uwvax!umn-d-ub!rutgers!bellcore!faline!thumper!ulysses!mhuxo!mhuxu!smh
From: smh@mhuxu.UUCP (S. M. Henning)
Newsgroups: comp.sys.mac
Subject: Re: Can Terminal Programs run at 2400 baud?
Message-ID: <7347@mhuxu.UUCP>
Date: 15 Mar 88 13:33:10 GMT
References: <10335@shemp.CS.UCLA.EDU>
Organization: AT&T Bell Laboratories, Murray Hill
Lines: 11

In article <10335@shemp.CS.UCLA.EDU>, lui@CS.UCLA.EDU (Stephen Lui) writes:
> Are the current terminal program capable of running at 2400 Baud?
> I've tried a few terminal emulators (MacTerminal, MicroPhone, Smartcom II)
>  at 9600 baud and they just can keep up and fall behind.

I use VersaTerm and VersaTermPRO routinely at 9600 and 2400 baud with no problems.
I found the 2400 baud modem is better at noise rejection than the 1200 baud
modems.

****                                                             ****
From the keys of Steve Henning, AT&T Bell Labs, Reading, PA mhuxu!smh