Path: utzoo!mnetor!uunet!mcvax!ukc!stc!ist!olgb1!slxsys!jpp
From: jpp@slxsys.specialix.co.uk (John Pettitt)
Newsgroups: comp.unix.xenix
Subject: Re: Xenix CGI graphics
Message-ID: <154@slxsys.specialix.co.uk>
Date: 1 Mar 88 20:33:08 GMT
References: <259@hudson.acc.virginia.edu>
Organization: Specialix International, London, UK.
Lines: 24

From article <259@hudson.acc.virginia.edu>, by wrp@biochsn.acc.virginia.edu (William R. Pearson):
> 
> 	Is anyone else using SCO CGI?  Do you have any PD-programs
> to share?
> 
> Bill Pearson
> wrp@virginia.EDU

I have a very hacked (not even alt.sources quality :-) mandlebrot
program for CGI.  It is set up for and EGA and to get any speed
you MUST have a *87 chip and if at all possible a 20Mhz 386/387
system.  

I anybody wants a copy please EMAIL me and I will try and send one.

(N.B. slxsys will be down for the last two weeks in march so don't
panic if you don't get a fast reply !)


-- 
John Pettitt, Specialix, Giggs Hill Rd, Thames Ditton, Surrey, England, KT7 0TR
{backbone}!mcvax!ukc!pyrltd!slxsys!jpp               jpp@slxsys.specialix.co.uk
Tel: +44-1-398-9422         Fax: +44-1-398-7122          Telex: 918110 SPECIX G
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<