Path: utzoo!mnetor!uunet!littlei!omepd!mipos3!cadev4!dbraun
From: dbraun@cadev4.intel.com (Doug Braun ~)
Newsgroups: sci.electronics
Subject: Re: shock box
Message-ID: <1866@mipos3.intel.com>
Date: 10 Mar 88 16:26:00 GMT
References: <439@amc-vlsi.UUCP>
Sender: nobody@mipos3.intel.com
Reply-To: dbraun@cadev4.UUCP (Doug Braun ~)
Organization: Corporate CAD, INTeL Corporation, Santa Clara, CA
Lines: 19

In article <439@amc-vlsi.UUCP> dale@amc-vlsi.UUCP (Dale Wlasitz) writes:
>We fit the entire unit inside a coke can, when lifted the
>fine wires taped to the exterior of the can produced a nice tingle to
>the unsuspecting. 

Am I correct in assuming you used a JOLT Cola can?

(All the sugar, twice the Caffeine, and 180 times the EMF!)



Doug Braun				Intel Corp CAD
					408 765-4279

 / decwrl \
 | hplabs |
-| oliveb |- !intelca!mipos3!cadev4!dbraun
 | amd    |
 \ qantel /