Xref: utzoo sci.electronics:2535 rec.ham-radio:4265
Path: utzoo!mnetor!uunet!husc6!mit-eddie!uw-beaver!cornell!batcomputer!itsgw!imagine!pawl18.pawl.rpi.edu!snyderw
From: snyderw@pawl18.pawl.rpi.edu (Wilson P. Snyder II)
Newsgroups: sci.electronics,rec.ham-radio
Subject: Television Data Transmission
Message-ID: <533@imagine.PAWL.RPI.EDU>
Date: 15 Mar 88 15:25:06 GMT
Sender: news@imagine.PAWL.RPI.EDU
Reply-To: snyderw@pawl18.pawl.rpi.edu (Wilson P. Snyder II)
Organization: RPI Public Access Workstation Lab - Troy, NY
Lines: 20
Keywords: TV Television Transmitter Receiver Radio
Summary: Small low-power television transmission


	Hello, I would like to know if it is possible to make a very
low power television transmitter.  Here's the catch, it needs to fit
into a HO Scale model railroad boxcar (About 2" by 5" by 5").
The data does not need to be transmitted onto the standard broadcast band,
nor does the format need to be standard.  Of course, if it is not a receiver
is needed.  I plan to use a small Semiconductor Imags sensor for the input,
so the input could be digital (???).  Finally, color is needed.
	Any help would be welcome.  (The radio signal only needs to make it
ten feet or so.)





______________________________________________________________________
Wilson P. Snyder II	   beowulf!lunge!snyderw@steinmez.UUCP
318 Crockett Hall, RPI	   (uunet!steinmez!bewulf!lunge!snyderw)
Troy, NY  12180-3590	   (518) 276-7189, or (802) 658-3799 if summer
----------------------------------------------------------------------