Path: utzoo!mnetor!uunet!husc6!uwvax!oddjob!ncar!ames!pacbell!att-ih!ihnp4!ihlpm!jmdavis
From: jmdavis@ihlpm.ATT.COM (Davis)
Newsgroups: comp.sys.amiga
Subject: Miximg Memory
Message-ID: <1778@ihlpm.ATT.COM>
Date: 18 Mar 88 14:34:49 GMT
Organization: AT&T Bell Laboratories - Naperville, Illinois
Lines: 23
Keywords: memory



I am considering buying extra memory for my A1000, (isn't everyone).
I would like to eventually get 2.0 or so Megs, but not now. However,
the cheaper boards come from the 1.0 MB range (of course).

Can I use an Insider 1.0 MB expansion AND a Starboard expansion AT THE
SAME TIME? (These boards were chosen just for example, internal vs
extranal is a question only if it is a signigicantly diffferent problem
from mixing boards in general.)

Obvious problems here could be that there are seperate address ranges
where each board lives. So 1 MB from board A and 2 MB from board B
may not give 3 MB of contiguous memory.  Is this correct? Is this an
issue? Are there other problems?

Thanks,

-- 
________________________________________
	This space would have been	|	Mike Davis
	LEFT INTENTIONALLY BLANK	|	ihnp4!ihlpm!jmdavis
	had I not written in it. 	|_________________________