Path: utzoo!mnetor!uunet!husc6!m2c!ulowell!cbmvax!schein
From: schein@cbmvax.UUCP (Dan Schein CATS)
Newsgroups: comp.sys.amiga
Subject: Re: Transformer for 2000?]
Message-ID: <3497@cbmvax.UUCP>
Date: 23 Mar 88 13:32:55 GMT
References: <659@wolf.UUCP>
Reply-To: schein@cbmvax.UUCP (Dan Schein CATS)
Organization: Commodore Technology, West Chester, PA
Lines: 28
Keywords: TRansformer

In article <659@wolf.UUCP> uzun@wolf.UUCP (Roger Uzun) writes:
>I just got a 5.25" 1020 disk and the Transformer for my Amiga 2000
>Rev 4.2.  I can get it to boot MS-DOS OK using a PSTransformer program
>I have but I cannot get it to accept any input from the keyboard.  It
>just stops and asks me for the date.  Anyone have any luck getting the
>transformer program to work on an A2000 with extra memory?  Please
>let me know!
>
>-Roger

   Transformer was written for use on the Amiga 1000 (Key point here is the
  number 1000). It was re-written to support additional memory over 512K and
  was released as a free upgrade for use on the Amiga 1000 and Amiga 500.

  It was not and is not written, designed, promoted, or supported for use on
  an Amiga 2000. If it works for you, your lucky. If it doesnt, stop by your
  dealer and look into a BridgeBoard.

-- 
   Dan Schein		 uucp: {ihnp4|allegra|burdvax|rutgers}!cbmvax!schein
   Commodore AMIGA			ARPANET:  cbmvax!schein@uunet.uu.net
   1200 Wilson Drive			Bix: dschein	     Plink: Dan*CATS
   West Chester PA 19380		phone: (215) 431-9100	   ext. 9542
+----------------------------------------------------------------------------+
   All spelling mistakes are a result of my efforts to avoid education  :-)
+----------------------------------------------------------------------------+
        I help Commodore by supporting the AMIGA. Commodore supports
         me by allowing me to form my own suggestions and comments.