Path: utzoo!mnetor!uunet!husc6!cmcl2!nrl-cmf!ames!pasteur!ucbvax!UNO.BITNET!CSCT0PY7
From: CSCT0PY7@UNO.BITNET
Newsgroups: comp.sys.apple
Subject: Laser 128 & Kermit 3.80
Message-ID: <8803231740.aa26117@SMOKE.BRL.ARPA>
Date: 23 Mar 88 22:34:00 GMT
Sender: uucp@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 24

In reply to: MPENDER%WPI.BITNET@husc6.harvard.EDU

>Does anyone know how to modify kermit 3.80 for the Laser 128?  Mine
>chokes on it, but I like it on a IIe.

I am having the same problems too on my Laser 128ex.  All I know at this
time is that it has something to do with the interrupts.  If you really need
to use Kermit 3.80 there is a quick fix.  Change to a driver that does not
use interrupts, but then you will have some problems loosing characters.
The Laser 128ex running at 3.6mhz will loose few characters at 1200 baud.
I hope to find an answer to the problem shortly.


>Does anyone know of this one-wire mod the person mentioned in order
>to get 60 interrupts a second?  This would come in very handy.

I remember hearing something about this; it had something to do with the
interrupts of the mouse interface.  I hope this helps.


Rene Campbell

CSCT0PY71583@UNO.BITNET -- Bitnet       My disclaimer is anything that will
362649(INFOS UD)        -- Telex I      keep me out of trouble with anyone.