Path: utzoo!mnetor!uunet!husc6!rutgers!psuvax1!burdvax!sdcrdcf!otto!convex!authorplaceholder
From: buyse@convex.UUCP
Newsgroups: comp.sys.apple
Subject: Re: Help - AppleWorks and French
Message-ID: <64800029@convex>
Date: 29 Mar 88 19:52:00 GMT
References: <4818@ecsvax.UUCP>
Lines: 16
Nf-ID: #R:ecsvax.UUCP:-481800:convex:64800029:000:624
Nf-From: convex.UUCP!buyse    Mar 29 13:52:00 1988


I think that you will need a printer that can print those special French
characters.  If you have one already, you might be able to define the
underline as a special printer command sequence to change into and out of
foreign-language character sets.

You can then put inside the text of your Appleworks document the
'underline begin' character, followed by the character that matches the
ascii value of the foreign language character that you wish to print,
followed by the 'unerline end' character.

It depends completely on your printer setup, I believe.

-Russell Buyse.

UUCP: {allegra,ihnp4,uiucdcs,ctvax}!convex!buyse