Xref: utzoo comp.sys.att:2866 comp.dcom.modems:1622
Path: utzoo!mnetor!uunet!husc6!cmcl2!phri!manhat!mancol!samperi
From: samperi@mancol.UUCP (Dominick Samperi)
Newsgroups: comp.sys.att,comp.dcom.modems
Subject: AT&T 4024C & Hayes 2400
Message-ID: <356@mancol.UUCP>
Date: 25 Mar 88 20:05:06 GMT
Organization: Manhattan College, NYC, USA
Lines: 22
Keywords: 4024, Hayes, carrier

I just installed an AT&T 4024C modem for use with a 3B2/300, and it seems
to work fine, except for one problem: the 4024 modem must be called 2-3
times before it sends a carrier that my Hayes 2400 understands. Most of the
time when I call the 4024 with my Hayes modem I hear the 4024 answer,
and send what sounds like a carrier (to human ears), but the Hayes modem
does not recognize it. I had the same problem calling with other Hayes
modems. Any ideas?

It was not clear how the dip switches on the 4024 should be set, but I
set them for 2400 Async operation. Perhaps some kind 4024 user (on a
3b2) can send me his/her dip switch settings? Thanks in advance.

I tried things like making my 2400H gettydefs entry point to itself, but
this didn't help. Here is the Dialers entry that I'm using (but I
realize that this shouldn't effect dialins):

4024 =+-, "" \r\c :--: O4=n\r n--n O12=y\r y--y \T\r\c red
-- 
Dominick Samperi, Manhattan College, NYC
    manhat!samperi@NYU.EDU           ihnp4!rutgers!nyu.edu!manhat!samperi
    philabs!cmcl2!manhat!samperi     ihnp4!rutgers!hombre!samperi
              (^ that's an ell)      uunet!swlabs!mancol!samperi