Path: utzoo!mnetor!uunet!sdrc!crgabb
From: crgabb@sdrc.UUCP (Rob Gabbard)
Newsgroups: comp.sys.cbm
Subject: Can't get 1670 to work right with Vidtex
Message-ID: <248@sdrc.UUCP>
Date: 22 Mar 88 13:24:48 GMT
Organization: Structural Dynamics Research Corp., Cincinnati
Lines: 13
Keywords: 1670 vidtex compuserve


 Is anyone using a 1670 with Compuserve's Vidtex (4.02 or 4.5) ? It works
fine at 300 baud but at 1200 baud I get nothing but garbage. Yes, I have
set the baud rate (META Q-2-8) and I can log on but it seems as if
everythings getting sent too fast and it gets garbaged and fragmented.
I've logged on at 1200 using a VT100 and a PC w/ RS-232 modem with no problem.
I also use Q-Link at 1200 w/ no problems.
-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Rob Gabbard                               |    UUNET: uunet!sdrc!crgabb
Workstation Systems Programmer            |    PHONE: (513)576-2600
Structural Dynamics Research Corporation  |
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=