Path: utzoo!mnetor!uunet!seismo!sundc!netxcom!jallen
From: jallen@netxcom.UUCP (John Allen)
Newsgroups: comp.sys.ibm.pc
Subject: Re: NEC Multisync Plus misfeature
Message-ID: <719@netxcom.UUCP>
Date: 21 Mar 88 23:33:04 GMT
References: <1686@bgsuvax.UUCP> <510@wintek.UUCP> <710@netxcom.UUCP> <258@bby-bc.UUCP>
Reply-To: jallen@netxcom.UUCP (John Allen)
Distribution: comp.sys.ibm.pc
Organization: NetExpress Communications, Inc., Vienna, VA
Lines: 25

In article <258@bby-bc.UUCP> john@bby-bc.UUCP (john) writes:
>> 
>> On a separate note, our original Multiscan has been performing well in
>                                   ^^^^^^^^^
>> 800 by 600 mode, even though it's not rated for that resolution.  Should
>> I expect damage to result from this "misuse", or are the claims about
>> these monitors not working in 800 by 600 mode based purely on the specs?
>> 
>
>Is this a typo or are you really talking about the Sony MultiScan and
>not the Nec MultiSync?  I ask because the rest of the article is primarily
>about the display resolution of Nec monitors.

My apologies, it was a typo.  I have used two original NEC MultiSync,
JC-1401P3A Monitors quite successfully in 800 by 600 "Enhanced" VGA
mode.  I would still welcome speculation as to whether this creates
(internal) voltages or frequencies which may be harmful to the monitor's
electronics.

John Allen
=========================================================================
NetExpress Communications, Inc.      uunet!netxcom!jallen
1953 Gallows Road, Suite 300         (703) 749-2238
Vienna, Va., 22180
=========================================================================