Path: utzoo!mnetor!uunet!husc6!ncar!ames!oliveb!pyramid!decwrl!labrea!navajo!marria
From: marria@navajo.UUCP (Michael Marria)
Newsgroups: comp.sys.zenith.z100
Subject: Re: Z-248 speed
Message-ID: <2060@navajo.UUCP>
Date: 25 Mar 88 19:04:37 GMT
References: <[E.ISI.EDU]24-Mar-88.15:53:51.SAC.HQSAC-ACMI>
Reply-To: marria@navajo.UUCP (Michael Marria)
Organization: Stanford University
Lines: 8
Keywords: Floppy drives


	Is it possibly to run a 5 1/4" quad density drive on the
existing old z100 floppy controller? It appears so from
the tech. manual. Has anybody done it? Any special considerations?


					Thanks,
					Michael