Checksum: 21231
Path: utzoo!utgpu!romwa
From: romwa@gpu.utcs.toronto.edu (Mark Dornfeld)
Date: Tue, 22-Mar-88 18:35:26 EST
Message-ID: <1988Mar22.183526.1932@gpu.utcs.toronto.edu>
Organization: University of Toronto Computing Services
Newsgroups: comp.unix.xenix
Subject: Re: XENIX 386 ESDI Crash
References: <1988Mar10.163610.27000@gpu.utcs.toronto.edu> <9927@steinmetz.steinmetz.UUCP> <5990@dhw68k.cts.com>
Reply-To: romwa@gpu.utcs.UUCP (Mark Dornfeld)
Keywords: XENIX ESDI Crash



 	>I had some real problems putting an OMTI 8620 and a CDC WREN III
>drive in a Wyse 386.  Sometimes it would boot and sometimes it would hang.
>SCO suggested jumpering W20.  The manual indicates it as reserved and 
>OMTI says that its only there for another version of the prom.  Since I

All the documentation that I have indicates that 20 should be
jumpered to show the controller that there is an ESDI drive
present.  This is what the WREN III is, isn't it?

I just installed the same disk and 20 is jumpered.

Mark T. Dornfeld
Royal Ontario Museum
100 Queens Park
Toronto, Ontario, CANADA
M5S 2C6

mark@utgpu!rom      - or -     romwa@utgpu