Xref: utzoo comp.sys.m68k:828 sci.electronics:2582 comp.sys.mac:14330
Path: utzoo!mnetor!uunet!mcvax!philmds!jwc
From: jwc@philmds.UUCP (Johan Cranendonk)
Newsgroups: comp.sys.m68k,sci.electronics,comp.sys.mac
Subject: Re: More on SCC68070
Message-ID: <389@philmds.UUCP>
Date: 23 Mar 88 10:26:49 GMT
References: <17366@glacier.STANFORD.EDU>
Organization: Philips I&E DTS Eindhoven
Lines: 44
Keywords: 68070, microcontroller
Summary: Support for SCC68070 from Philips



Subject: More on 68070
Keywords: 68070, microcontroler, development systems

More information on support for the SCC68070.

The support for develpment of applications around a 68070 is sold 
by the global alliance in Test & Measurement (Fluke and Philips).

Contact Tom Nealon or Johan Cranendonk at Philips in Eindhoven,
Building TQIII-4, 5600 MD Eindhoven, The Netherlands, tel ++31-40-788054 or
++31-40-788386 for detailed information.

General information:
The 68070 is supported trough Pascal and C-compilers running on a variaty
of hosts (ao VAX ULTRIX, VAX VMS, PC-AT with XENIX, Philips Microprocessor
Development system, etc.) including assemblers.
Concerning hardware support an incircuit emulator box is available including
screen driven software to support the debugging of software even on the
level of the language inwhich the program for the 68070 is written in. This 
software enables you to use in your emulation session the same language
as is used to program the application. It includes features to trace variables,
structures and procedure calls, handles back-tracing, step at "high level
language statement level", software tracing of memory locations and registers,
etc. etc.. The hardware of this Micro processor Adaptor Box (MAB) allows for 
four hardware break and/or trigger registers, to be used seperately or armed,
generating either a break, a pulse or a signal to qualify data capturing.
Processors memory can be addressed logicaly or physically (before or after the
build in MMU. Memory can be mapped in segments and be declared as RAM, ROM or
guarded. Clock source can be derived from an internal or external cristal
or from the prototype. Emulation break can be selected from a wide range
to be switched on or off (power fail, reset active, halt-line active,
not ready, etc.).

The MAB 68070 is to be connected to a host system this can be an IBM-PC-AT
or compatible running Xenix or a Philips propriatry host (68000 -based)
running Unix(TM).

For more Please contact the above mentioned persons.

					Johan Cranendonk,
				Member of the MDS-team 88,
             The Global Alliance in Test & Measurement, FLUKE and PHILIPS.