Xref: utzoo comp.mail.uucp:1230 comp.dcom.modems:1720
Path: utzoo!mnetor!uunet!lll-winken!lll-tis!ames!nrl-cmf!mailrus!umix!umich!mibte!gamma!ulysses!terminus!westmark!dave
From: dave@westmark.UUCP (Dave Levenson)
Newsgroups: comp.mail.uucp,comp.dcom.modems
Subject: Re: TELEBIT modems and UUGETTY
Message-ID: <146@westmark.UUCP>
Date: 13 Apr 88 23:57:10 GMT
References: <1133@cblpf.ATT.COM>
Organization: Westmark, Inc., Warren, NJ, USA
Lines: 25

In article <1133@cblpf.ATT.COM>, mark@cblpf.ATT.COM (Mark Horton) writes:
...
> Since it's a single phone line, I must use uugetty with HDB UUCP
> to allow both dialin and dialout on the same port.  This works fine
> with the internal modem, and with the AT&T 4024, but the TELEBIT uses
> the Hayes command set, and the Hayes codes and uugetty don't get along.

We routinely use Hayes-compatible modems with HDB uucp on a
PC6300PLUS here at westmark.  The version of uugetty that is
supplied with this system supports the command line option -d as:

	 00:2:respawn:/usr/lib/uucp/uugetty -r -d8 -t 60 tty1 2400
	                                       ^^^

in our inittab file.  The -d8 causes uugetty to wait 8 seconds
before listening to the line, after an incoming call has arrived. 
The RING message from the modem triggers this delay, and the delay
causes the RING message, and the CONNECT message that normally
follows it to be ignored.  After 8 seconds, we respond with login:
and incoming uucico dialers seem to be able to deal with that.

-- 
Dave Levenson
Westmark, Inc.		A node for news.
Warren, NJ USA
{rutgers | clyde | mtune | ihnp4}!westmark!dave